100% Original Autel XP400 Key and Chip Programmer XP400 VCI Dongle IMMO Key Reprogramming Tool work with Autel MAXIIM IM508 IM608

100% Original Autel XP400 Key and Chip Programmer XP400 VCI Dongle IMMO Key Reprogramming Tool work with Autel MAXIIM IM508 IM608

0 reviews 0 sold. Only 1000 remain
Looking for help? or Get More Discount
Please contact WhatsApp: +1 850 888 8336
Product Code: ATSTSK282
Availability: In Stock
Weight: 2.50kg
Size (LxWxH): 32cm x 27cm x 11cm
Viewed 12451 times

Product Description

100% Original Autel XP400 Key and Chip Programmer XP400 VCI Dongle IMMO Key Reprogramming Tool for Autel MAXIIM IM508 IM608

Why Buy Autel XP400?

1. If your original XP400 for IM608 / IM600 is broken, you can buy this to replace the old one. 
2. With XP400, You can release more function for your IM508: 
If you have a MaxiIM IM508 or Otosys IM100, you want to do advanced IMMO reprogramming like IM608 / IM600 do, you can buy an XP400 for your machine. Then it works on IMMO functions as im608 / im600. Detailed functions comparison between XP400 and XP200, please refer to bellow chart.

Autel XP400 Key and Chip Programmer
Attention Please:

Autel XP400

XP400 Key & Chip Programmer Function List:

1. Support PC
2. MCU / EEPROM Chips Read / Write
3. ECU Read / Write
4. MC9S12 Encryption Chip Read / Write
5. Key Read / Write
6. Mercedes Infrared Key Read / Write
7. Remote Frequency Detect
8. IC Card Read/Write

XP400 KEY & CHIP PROGRAMMER Introduction:

Connect the IM608 tablet to the XP400 Key Programmer (no vehicle connection required) to access the key chip, read, retrieve and write key information, as well as other key related functions. 

1. DC Port – provides 12V DC power supply.
2. USB Port – provides data communication and 5V DC power supply.
3. DB 26-Pin Port – connects with the Mercedes Benz infrared cable, vehicle key cable, ECU cable, MCU cable, MC9S12 cable.
4. Cross Signal Pins – holds the MCU board, MCU spare cable or DIY signal interface.
5. IC Card Induction Area
6. Vehicle Key Slot – holds the vehicle key.
7. Transponder Slot – holds the transponder.
8. Remote Control Transponder Induction Area Figure 2-5 XP400 Views 11
9. Mercedes Infrared Key Slot – holds the Mercedes infrared key.
10. Status LED – indicates the current operating status.
11. Locker – locks the EEPROM component transponder slot to ensure proper functioning.
12. EEPROM Component Transponder Slot – holds the EEPROM plug-in transponder or EEPROM socket.

DC Port:  Provides 12 V power supply for the XP400.
USB Port: Provides data communication and power supply for handheld device, PC and XP400.
DB 26-Pin Port: 5 components can be connected to this port:
1) Mercedes Infrared Cable
2) APA102 – Remote Match Cable (optional)
3) APA104 – ECU Cable
4) APA105– MCU Cable
5) APA106 – MC9S12 Cable

DB 26-Pin Port:
Five components can be connected to this port:
Mercedes Infrared Cable
APA102 – Remote Match Cable (optional)
APA104 – ECU Cable
APA105– MCU Cable
APA106 – MC9S12 Cable
APA102 – Remote Match Cable (optional)
No.ColorDefinitionPin correspond to DB26 Note
 3Blue and WhiteREMOTE_MISO14 
4Gray and WhiteREMOTE_MOSI 5 
5Brown and WhiteREMOTE_CLK 23 
 6Green and WhiteREMOTE_RX_C S15 

APA104 – ECU Cable
 No. ColorDefinitionPin correspond to DB26 Note

APA105 – MCU Cable
No.Color DefinitionPin correspond to DB26 Note
1Red and WhiteVPP120 
2Red and BlackVPP212 
3Red and Yellow+12V7 
4Red and BlueVPPR/ 
15BlackGND10Shielded Twisted
16WhiteOSC1Shielded Twisted
APA106 – MC9S12 Cable
 No. Color DefinitionPin correspond to DB26 Note
6BlackGND10Shielded Twisted
7WhiteOSC1Shielded Twisted
Cross-shaped Signal Pin: Places MCU board, MCU spare cable or DIY signal cable to read or write MCU and ECU chips.
IC Card Induction Area: Reads and writes IC card information.
Vehicle Key Slot: Holds the vehicle key to read or write vehicle key information.
Transponder Slot: Holds the transponder to read or write transponder information.
Remote Control Transponder Induction Area: Reads and writes remote control transponder information.
Mercedes Infrared Key Slot: Holds Mercedes infrared key to read or write Mercedes vehicle key information.
Status LED: Shows the current operating status of the XP400. See the table below for detailed description.
Light GreenPowered on and default
Flash GreenCommunication
Light RedError
Locker : Places EEPROM chip or socket to read or write EEPROM information.
EEPROM Component Transponder Slot : Holds the EEPROM plug-in transponder or EEPROM socket.
Operating Temperature-10℃ ~ 60℃ (14℉ ~ 140℉)
Storage Temperature-20℃ ~ 60℃ (-4℉ ~ 140℉)
PortMini USB, VGA_DB15
Input Voltage5 VDC
Operating Current< 250 mA
Maximum Consumption1 W
Device Dimensions (L*W*H)130 mm * 68 mm * 28 mm
Package Dimensions (L*W*H)201 mm * 167 mm * 75 mm
Net Weight466 g

Package includes:

1pc x AUTEL XP400

Write a review

Note: HTML is not translated!
    Bad           Good

When you order from autel-store.com/, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!